Apr 9th, 2012, 18:44 | #1 |
Senior Member
注册日期: Oct 2005
帖子: 1,573
积分:6
精华:1
|
请教自己怎么装吊扇
1.安装手册里要求要求用自带的钢丝穿过大梁固定,可是打开cap只有一个塑料的outlet box,直接看不到大梁,是否一定要把塑料盒拆下换掉? 2. 如果确需拆换,那个塑料盒是一侧固定到梁上的,从里面看不到固定的螺丝,不知道怎么卸下来换铁盒子? 请有经验的dx指点迷津,谢过先! |
|
Apr 10th, 2012, 21:43 | 只看该作者 #10 |
Senior Emperor
注册日期: Aug 2004
帖子: 508
声望: 56737
|
如果是一楼的话, 要打孔的。 不割开天花板是不可能的。 找到相邻的JOIST, 然后割开一条。 装一根木条在两边连在JOIST上。电扇基作装在中间。 天花一般只能粗补以下, 窍门就是买个MEDALLION, 尺寸一定要算好,否则MEDALLION不能把孔完全盖上就麻烦了。 一楼不歌天花的话以前那个盒子拿不下来, 订上去就更没有可能了。 如果是在二楼, 可以爬到隔楼上, 不需要割天花板。 |
|
感谢 Knowledge_IS_Power 此篇文章之用户: |
rosymerry (Apr 11th, 2012) |