Jun 22nd, 2006, 06:12 | #1 |
Senior Member
注册日期: Nov 2005
帖子: 11,269
积分:19
精华:6
|
第一次换火花塞总结
2002牛车第一次换火花塞。 在拆火花塞的时候,前面的3个比较好拆,后面的,尤其中间的不好拆,根本就看不见,只是顺线能摸到,这时最好是先把套筒用手拿着放在火花塞上,对好位置,然后再把rachet伸进去,按在套筒上,这样容易一些,拧动火花塞后,只把rachet拿出来,然后用手直接拧带着火花塞的套筒,速度加快不少。 安装的时候,涂好anti-seize,也直接涂grease,如果拧好后再涂grease,一是费劲,二是不均匀,然后还用套筒套住火花塞,用手拿着放上去拧,拧不动后在上rachet,拧好后高压线时要注意高压帽进槽里的手感,也可以听见喀的一声,要不老合计是不是压到底了 有条件的话用torque来较紧火花塞,自己可以感觉力量的大小。没有的话,根据卸下来的力量感觉相对应也可以。 |
|