Jul 31st, 2007, 00:00 | 只看该作者 #668 |
▂ ▂ ▃ ▄ ▅ ▆
注册日期: Jul 2004
住址: ROD
帖子: 3,292
积分:5
精华:5
声望: 78577954
|
I dont know what do you have and what settings you did in ur receiver. here is step by step loading guide, hope these can help ------------------------------------------------------------------------------- CW600s Premium S/W Upgrade Guide! Tools Need to update your receiver CW600s Premium Receiver: 1- Null Modem Cable 2- get the Newest bin in the download section of the forum. Make sure it is for Premium model. 3- Loading Software "Loader v1.05.zip"-edit abor- or use the 1.06 loader. Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder. 1) Connect your PC and receiver with twisted RS-232C Null modem cable. 2) Power off the receiver from the back switch. 3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4. Here how you get into “boot”MOD: Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver. 4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“. 5) Start New LoaderV1.05.exe check if the right COM port is selected then select <Download Main S/W>, press <Open> and select the bin file,“CX_Kround_600Perminum_V1.XX_date.bin" then click <Start>, upgrade will begin. 6) After finishing, the receiver LED will display "-End" If your experience any problem during the upgrade start over again. Here is a guide to Scan your Satellites Connect your sat cable to your receiver and hook up your receiver to your TV set. You can scan Single or Multiple satellites for channels at the same time. Single Satellite search can be done by going to: Main Menu -> Installation -> Antenna Setup -> Select the satellite you want to scan for channels and press “Red” key on your remote Here are typical Configuration settings for a DSS LNB Antenna Setting Satellite name 22 Echostar 6,8 (110W) Transponder 12224 / V / 20000 / 5 / 6 LNB Freq 11250 LNB Type Normal 22 KHz Off Diseqc Number LNB1 Legacy SW Off Motorized System None You can use “Legacy switch” by changing it to “SW21 Dish1” and changing Diseqc Number back to NONE. -After you have done changing the configuration according to your setup press “RED” key on you remote. It will start scanning all of the channels for that particular satellite. -You can also access Blind Scan feature from the same screen by pressing “Yellow” key from your remote. -If you want to scan only one transponder then press “Blue” key from your remote. Multiple Satellites Scan You can scan maximum 4 satellites at a same time using easy tuning feature available in New OSD Main Menu -> Installation -> Easy Tuning Here is a typical setup for multiple satellites using Easy Tuning feature: Status Satellite name Diseqc LNB Freq OnEcho 3LNB1 11250 On Echo 6,8LNB2 11250 OnEcho 7LNB3 11250 OnNimiq 1,3LNB4 11250 To go from Status to Satellite name scroll down until you see Satellite name field get highlighted then use right/Left key to change satellite you want scan; now scroll down again until you get to Diseqc switch setting change it to whatever your switch setting; scroll down to LNB Frequency setting and change it to appropriate frequency. After you have finished configuring all Satellites press OK key using right or left press “Fast Tuning” or “Auto Tuning” system will start scanning all of the satellites one by one. Enable the Patch To watch scrambled channels you must Enable the patch Exit all menus, Press F1 key; the LED will display 'H', then press '000' please stick this for me here,ty. |
|
Jul 31st, 2007, 08:46 | 只看该作者 #670 | |
Senior Member
注册日期: Aug 2006
帖子: 2,388
积分:21
精华:6
声望: 35530013
|
引用:
步骤是 1,关闭机器用data cable把机器和电脑连好 2,打开机器电源,等机器启动完毕后按机器面板上的power开关或遥控器上的power开关把机器转成stand by状态,就是机器前面的灯显示"--:--" 3,运行loader,选择要刷的软件,点击开始下载,一直要等待全部刷完,机器会显示End,然后关闭机器电源拔掉线.就可以了. 估计你没有把机器转换成stand by状态. |
|
怒放的生命
|
||
|
Jul 31st, 2007, 17:56 | 只看该作者 #680 |
好事之徒
注册日期: May 2005
帖子: 3,867
声望: 2054762
|
刚去download最新BIN文件,也不管用,这次不知道要等多久. http://www.freedomfta.net/ |
|